Create a live load reduction factor in the design parameters for each material type. This way the live load is captured in the analysis and reduced accordingly in the design. This might cause an issue with 2nd order analysis if you don't want all ...

It would be extremely useful to be able to create "regions" on a spread footing design with different soil depths.When designing a spread footing/retaining wall combination, there isn't a good single solution at the moment.It would also be nice to...

I know you can view deflections and node displacements, but I think it would be helpful to be able to specify limits and have the program display (in the member status) if any member exceeds the set deflection, or displacement limit assigned to th...

Currently, RAM can design "Joists" but doesn't specifically design the members of the joist. As a joist designer, we would love to be able to design the sections of a joist per SJI (Double angles, webs, etc) This can be implemented by Bentley, or ...

It would be very appropriate to include equations for demand/capacities in the report for things like sliding resistance, moment, shear, etc. For example, for sliding resistance, the passive equation, the cohesion equation, and the coefficient of ...

It would be great if we could create stage sequencing where a stage number is assigned to every member. Add the ability to analyze and design separate stages of construction such as anything stage 1 or lessstage 2 or lessstage 3 or less The analyz...

RAM Steel does the vibration check based on FloorVibe. However, with complex geometry finite element basis on design guide 11 is required to check vibrations. Other programs like ETABS, Robot Autodesk or Tekla does these calculations. Please have...

Ability to generate moving loads in RAM Elements similar to STAAD.Pro.

Using the analysis results from FEM and wall end support node reactions of shells, it would be great to have the option to design continuous footings via the foundation module similar to the spread and combined footings design module, or via extra...

Ability to add point loads or line loads to areas. Areas would then distribute the loads to the supporting members based on the direction of the area.