When created a floor framing DXF, only gravity beams show studs. Please include the stud count on lateral beams as well.

From the RAM Manager, the Criteria > Member Loads dialog has a section labeled "Snow vs Roof Live Load" and says "From version 2026, both roof and snow loads are considered." In ASCE 7-16 and 7-22 section 2.2 "Symbols", and IBC 2021 section 160...

The lateral nodal loads aren't used until RAM Frame, so why should I have to go through RAM Steel Beam and Column checks every time I change one? These should be able to be applied and modified in the RAM Frame module. This would also help deletin...

Often, roofs are more complex than flat, full-plate diaphragms with uniform parapet heights on all sides. When a single parapet height assignment in RAM Frame isn't accurate enough, the user needs to define additional wind loads. I would like to m...

In frame, allow defined section cuts for diaphragms to be saved rather than redrawn every time.

In the newly adopted NBCC2025, load factors from gravity load combinations are being changed. In Canada, RAM will be incorrect/obsolete on all projects moving forward unless the load combinations are addressed.

RAM Beam needs to allow zoom with mouse scroll similar to other RAM modules.

As part of user assigned beam sizing, occasionally would like to override the default camber value reported.

Adding an axial design check for beams or collectors to a braced frame lateral frame system. In particularly for rigid diaphragms these forces are not applied to horizontal members and require separate hand checks or analysis in another program. T...

It's now 2024, many if not all of the requests in this forum have been open requests for YEARS and in some cases over a DECADE. Why is this program not being updated other than for new code requirements? Wind uplift still has not been implemented ...