Analyze and design ramps that joins different levels in a structure, as the ones you find in parking structures, for both, concrete and steel.

As far as I am aware, RSS does not track the load transfer when a wall is sitting on a one-way deck without a supporting beam or wall directly below. The loads from the wall above the deck is "lost". My firm does a lot of multi-family construction...

It becomes difficult when there is no template that can apply to joint for connection design. For instance, I have I-section column and hollow rectangular section beam. There is no template that can design such kind of joint.

Enhancement submitted on behalf of John Gruber. CS0134441 - PBI PRODUCT BACKLOG ITEM 1526907: NDS Cr values for assemblies. My member I was analyzing is 4-2x12. Therefore, there are four 2” nominal thickness members and are more than three members...

Add Fixed end beams to the gravity beams for design.

In the Analysis -> Load Combinations we are able to view a member force envelope for the Max or Min, but not the absolute value for worst case loading. When looking at a braced frame elevation with brace axial loads, in order to determine the a...

See attached files.

Could we get the option for other than rectangular openings in shells? Round openings in particular would be very helpful, especially in an FEA program where sharp corners create large stress concentrations that may not even be present when many o...