Skip to Main Content
Need Support? Let’s guide you to the right answer or agent.
ADD A NEW IDEA

RAM Connection

Showing 53 of 227

• Does RAM Connection support Box Columns (Double ISMB/ISMC) with strengthening plates for moment-resisting or shear connections? (see attached drawing) • Can RAM Connection be customized for specific load cases, codes, or connection types? · Can RAM Connection design connections for base plates and bracing using Box Columns with strengthening plates?

It could be useful for companies like Spray Engineering, Cheema Boilers etc. Composite Connections are also in demand.
1 day ago in RAM Connection 0 Needs review

Applied Beta Angle of a member in STAAD model isn't working in RAM connection design

I have few members of a structure frame that were oriented 90 degree using Beta Angle. However, this applied Beta Angle no more works in RAM connection when I try to design a connection in STAAD RAM connection.
4 days ago in RAM Connection 0 Needs review

RAM Connection should have the capability to design any kind of joints

It becomes difficult when there is no template that can apply to joint for connection design. For instance, I have I-section column and hollow rectangular section beam. There is no template that can design such kind of joint.
4 days ago in RAM Connection 0 Needs review

Ram Connection Report Formatting within Staad

ram standalone has reports, etc updated yet that is not available within Ram when you work directly within staad...why not? Current report formatting for Ram is awful
9 days ago in RAM Connection 0 Needs review

Lifting Lug & Cap Plate Connection Design Within Ram / Staad

Lifting lugs and cap plates are always needed for modular design which is done within Staad + Ram Connection...these are standard type of connections and their design should be accommodated within the programs vs having to use other programs to do...
9 days ago in RAM Connection 0 Needs review

Lifting Lug & Cap Plate Connection Design Within Ram / Staad

Lifting lugs and cap plates are always needed for modular design which is done within Staad + Ram Connection...these are standard type of connections and their design should be accommodated within the programs vs having to use other programs to do...
9 days ago in RAM Connection 0 Needs review

Back-to-back channel splice connection

Double back-to-back channels are typical for design of walers. Adding double channel section for beam splice connection with end plates would allow for this type of connection to be modeled.
11 days ago in RAM Connection 0 Needs review

Merge multiple connections which happen at one joint

I had a connection that required a shear connection framing from one beam, a moment connection from another beam and a horizontal brace from another beam all at one column. The detailer needed a combined detail merged as one. As another example, w...
21 days ago in RAM Connection 1 Needs review

HSS beam to Wide Flange column

Currently for beam to column connections, if the beam is HSS then the column must also be HSS. This is very limiting. It would be nice to allow HSS beam to WF column connections. The forces are often shear, moment & torsion. It would be great ...
3 months ago in RAM Connection 0 Needs review

Designing a Vertical X-brace connection with one member continuous

99% of the details I have seen for vertical x-bracing shows one member continuous. I design a lot of connections for a steel fabricator and I am always required to perform a hand calc or 2 ram connection calcs with one being the horizontal X-brace...
9 months ago in RAM Connection 0 Planned