I had a connection that required a shear connection framing from one beam, a moment connection from another beam and a horizontal brace from another beam all at one column. The detailer needed a combined detail merged as one. As another example, w...

Currently for beam to column connections, if the beam is HSS then the column must also be HSS. This is very limiting. It would be nice to allow HSS beam to WF column connections. The forces are often shear, moment & torsion. It would be great ...

RAM connection is not having an option to design the thru bolt connection - baseplate is connected to the concrete with thru bolt. Instead of post anchor and preinstalled anchors, sometimes it is needed to use thru bolt connection. Please find the...

In the current project I am working on, I need to design steel supports for the pipework. In some cases there are torsional moments and their effects on base plate have to be addressed. At the moment, Base Plate design in RAM Connection does not i...

For bolted flange plate beam-to-girder configurations, RAM currently uses a bolted flange plate only at the top flange, and shows a CJP weld for the bottom flange to girder web. We often will use flange plates at BOTH beam flanges. It would be gre...

We often use directly-welded moment connections, with beam flanges that are full-pen welded to the supporting member. RAM Connection can do that for beam-to-column connections, but it would be great if you could add that connection for beam-to-gir...

Problem: Beam to column-web connections (BCW) create dimensional conflicts between beam flange width, and the space between column flanges. This often occurs when the bolt lines project and beam flange lines project inside of the web space and wit...

Problem: Beam to column-web connections (BCW) sometimes require the bolt lines outside of the web space and beyond the flange lines. With double angles, the beam web must fit between the two angles, which becomes a fit-up and erection problem. Sin...

Please consider allowing the use of Parallel flange members as columns in column-column and column-beam connections.

much more stiffener plate type required for column baseplate joint calculation in RAM connection。