Many times I will change one load, for example a seismic load which is palced at the Ridge. Then I have to reanalyze and redesign the entire model, every load case. There should be a way to analyze only the affected load cases and redesign only th...

When the camber of a beam brings the deflection criteria within parameters, the option to turn off flagging them as failed in report would be greatly appreciated. In a large job with several repetitive floors with cambered beams, there can be hun...

We generally require a different minimum % composite for beams as opposed to girders. It would be beneficial to apply member specific rules, similar to how different deflection criteria is applied.

I am wondering if there has been any progress on implementing 50% unbalanced snow loads for cantilevers. In a forum post from 2020, Seth Guthrie said that it was on the backlog ( https://communities.bentley.com/products/ram-staad/f/ram-staad-forum...

I would like to be able to model nonsymmetrical systems where baseplates are considered as pinned when in uplift and semi-rigid when in compression.This works well for symmetrical systems, but when the system is non-symmetrical, I have to make two...

When generating the column design report, please don't make me click OK for every inadequate column. A summary of all inadequate columns or no warning at all would be sufficient.

See attached files.

I tried to find the sets of command using the API to extract data from the Audit Cross section, I believe it would be very great if this feature is available in Ram Concept if not already.

Please add feature to be able to have custom templates for ram concept models that are embedded in ram structural models.

RAM concrete ignores out-of-plane shear stress less than 0.000050 ksi. Allow us to increase this threshold or ignore it entirely. I'm still getting walls flagged for 0.2 kips of out-of-plane shear in a 10' wide by 26" thick wall.