When assessing a transfer floor, applying (and updating) transfer loads can be a time consuming process. A feature to export reactions from the floor(s) above and import to the transfer floor model as imposed loads would save time and errors. Pref...

Need a column cap plate with moment - (4) bolts each side - (8) bolts total for a Wide Flange Beam and a HSS column. And ability to add stiffeners for cap plate to column

In the concrete wall module, special boundary element zone requirements are only checked against the displacement method (ACI 18.10.6.2). In ACI 318-14 and 19 section 18.10.6.2 is directed at slender walls with Hw/Lw >= 2. If the aspect ratio o...

When will software be updated for CSA S16-24? We are seeing projects where this is a requirement. So far, we have been able to confirm that CSA S16-19 is acceptable, but that may not be possible much longer. Thank you.

RAM Beam needs to allow zoom with mouse scroll similar to other RAM modules.

I'm working on reducing the embodied carbon of a project of mine, and I'm having to compare column systems, between WF columns and HSS. WF columns have significantly lower embodied carbon (~60% reductions when using the same weight of steel), so I...

Agregar la verificación de conectores de corte tipo Cruz, con perfiles tipo W HEA, HEB o perfiles Tubulares (circulares o cuadrados) dentro del la interfas de RAM que esta dentro del Staad Pro.

There is a pretty nice procedure for importing geometry from RAM SS to RAM Concept for two-way slab design and vise versa to capture the two-way slab properties in RAM SS. But this is really only idealized for when there is only a two-way podium a...

Include the self-weight of braces in the dead load.

Add wind uplift load cases to RAM Frame.