In Ram concrete columns, there is often an error in the design of the columns which is due to the spacing of shear links whereas it is impossible to change the spacing manually, thus making all the columns design failing due to a shear links spaci...

Often times I create 3D models of similar frames but they have different tributary widths.For our 2D analysis we apply the loads to the nodes and members and not to areas.When we have to transition to 3D models, it would be great to have the abili...

Create a live load reduction factor in the design parameters for each material type. This way the live load is captured in the analysis and reduced accordingly in the design. This might cause an issue with 2nd order analysis if you don't want all ...

It would be extremely useful to be able to create "regions" on a spread footing design with different soil depths.When designing a spread footing/retaining wall combination, there isn't a good single solution at the moment.It would also be nice to...

As some one who is colorblind the yellow of the warning design and green of the complete design are similar enough that I can't see them. Others in my office who are color blind have the same issue I have. It would be great if there was a feature ...

I know you can view deflections and node displacements, but I think it would be helpful to be able to specify limits and have the program display (in the member status) if any member exceeds the set deflection, or displacement limit assigned to th...

Wind loads tributary to "ground" are not applied even if there are stories below ground. Please add an option to allow the user to apply these currently neglected loads to the structure.

It would be very appropriate to include equations for demand/capacities in the report for things like sliding resistance, moment, shear, etc. For example, for sliding resistance, the passive equation, the cohesion equation, and the coefficient of ...

Currently, RAM can design "Joists" but doesn't specifically design the members of the joist. As a joist designer, we would love to be able to design the sections of a joist per SJI (Double angles, webs, etc) This can be implemented by Bentley, or ...

It would be excellent if the RAM Connection program had the option to export to Excel the report of the input data and results of the connection design.