Double back-to-back channels are typical for design of walers. Adding double channel section for beam splice connection with end plates would allow for this type of connection to be modeled.

I had a connection that required a shear connection framing from one beam, a moment connection from another beam and a horizontal brace from another beam all at one column. The detailer needed a combined detail merged as one. As another example, w...

It's now 2024, many if not all of the requests in this forum have been open requests for YEARS and in some cases over a DECADE. Why is this program not being updated other than for new code requirements? Wind uplift still has not been implemented ...

As part of user assigned beam sizing, occasionally would like to override the default camber value reported.

Adding an axial design check for beams or collectors to a braced frame lateral frame system. In particularly for rigid diaphragms these forces are not applied to horizontal members and require separate hand checks or analysis in another program. T...

There should be options for checking gravity beams/columns for multiple load combinations. Having to select whether snow or live loads are to be used is a bit 1980's era softwaresk. Additionally, it would be beneficial to be allowed to apply wind ...

Provide keyboard shortcuts for RAM Modeler similar to CAD to speed up time it takes to create a model.

Below is a list of thoughts about lateral point(nodal)/line loads. Incorporating any of the below ideas would be helpful. 1. Allow the user to apply lateral line loads as well as lateral point(nodal) loads. 2. Allow the user to apply lateral point...

Currently when the user exports data to CSV, it's basically a text version of the pdf data output. The organization of data is difficult to post-process because the data has page headers based on load cases and combinations (among other items). At...

When you are defining a floor in RSS, it would be very useful to be able to import drawings in DWG formats to be used as a template or reference file to define the floor data. You can do this in Ram Concept.; why not in RSS?